A computer system consisting of its processor, memory and I/O devices accepts data, processes it and produces the output results. Can you tell in which component is the raw data fed?


Options: Mass Memory,    Main memory,    Logic unit,    Arithmetic unit

Ans:B,B


Description:

Asked in: KCC-2018   |   JOA 556-2018  |  HRTC JTO-2017

Hits Today: 10657 | Level: Moderate


******************************************************

Want to see where do you stand among other aspirants in "Computer" category?

Click Here to take quick 10 mins MCQ test to find out.




Got some suggestion about this question or to make this site better? Please leave your comments below.




More Computer Fundamental Related questions:


. Worksheet can be renamed by
Options: Adding ? symbol at the end of filename while saving workbook B. Click on Worksheet tab by Holding CTRL Key and type new name C. Double Click on the Worksheet tab and type new name D. Worksheet cannot renamed

Ans:– C ,


The number of bits that are typically stored on each track of a magnetic disk is usually
Options: the same,    different,    depend on the program to be stored,    All of the above

Ans:A ,A


The speed at which the monitor accepts data is called:
Options: bandwidth,    response time,    interlacing,    scanning

Ans:A ,A


What type of computer programming is used for airplane ticket reservation system?
Options: Multi programming,    Real time programming,    Time sharing,    Batch programming

Ans:B,B


Why is the width of the data bus so important to the processing speed of a computer?
Options: The narrower it is, the greater the computer's processing speed,    The wider it is, the more data that can fit into main memory,    The wider it is, the greater the computer's processing speed,    The wider it is, the slower the computer's processing speed

Ans:C ,C


A device for converting handwritten impressions into coded characters & positional coordinates for input to a computer is
Options: Touch panel,    Mouse,    Wand,    Writing tablet

Ans:D,(Danswer


The Personal Consultant is based on:
Options: EMYCIN,    OPS5+,    XCON,    All of the above

Ans:D ,D


  Microsoft PowerPoint can insert objects from the following add-ins? A.  Equation Editor B.  Organization Chart C.  Photo Album D.  All of these
Options:

Ans: – D ,


All the instructions and procedures needed to start up a computer, to the point it can load an operating system, are stored in ROM chips. In IBM compatible PCs this is called the _____
Options: RAM BIOS,    ROM BIOS,    EPROM,    POST

Ans:B,B


Which of the following is not a worksheet design criterion?
Options: a. Efficiency b. Aditibility c. Description d. Clarity

Ans:#8211; c,#8211; c


Memory unit is one part of
Options: Input device B. Control unit C. Output device D. Central Processing Unit

Ans:– D ,


. Which function calculates your monthly mortage payment?
Options: a. PMT (payments) b. NPER (number of periods) c. PV (present value) d. All of above

Ans:– a,– a


Which of the following IP address class is Multicast
Options: Class A B. Class B C. Class C D. Class D

Ans:– D ,


Impact printers
Options: strike a ribbon against the paper to produce character images,    include ink-jet and thermal devices,    are more expensive than Laser printers,    use optical technology

Ans:A,A


. What’s a quick way to extend these numbers to a longer sequence, for instance 1 through 20?
Options: a. Select both cells, and then drag the fill handle over the range you want, for instance 18 more rows b. Select the range you want, include both cells, point to fill on the Edit menu, and then click down. c. Copy the second cell, click in the cell below it, on the standard toolbar click the down arrow on the Paste button, and then click Paste Special d. All of above

Ans:– a,– a


Expand EDSAC
Options:

Ans:Electronic Delay Storage Automatic calculator,


. What is the shortcut key to hide entire column?
Options: a. CTRL + − b. CTRL + 0 c. CTRL + H d. CTRL + C

Ans:– b,– b


Which option will be used with touch command to change the access time?
Options: -a,    -b,    -t,    -h

Ans:A ,A


A graphic representation of an information system is called
Options: flow chart,    pictogram,    data flow diagram,    histogram

Ans:C ,C


The contents of information are stored in
Options: Memory data register B. Memory address register C. Memory arithmetic registers D. Memory access register

Ans:– A ,


Which of the following, is a component of an expert system?
Options: inference engine,    knowledge base,    user interface,    All of the above

Ans:D ,D


. Which of the following statement is false?
Options: A) Mechanical analog computers have existed for thousands of years B) There are mechanical analog computers and electronic analog computers. C) All electronic computers are digital computers D) All of above are false

Ans:C,C


At cut off, the Q point is at
Options: upper end of the load line,    middle of the load line,    lower end of the load line,    infinity

Ans:C ,C


High-level languages:
Options: are "procedure-oriented",    are very difficult to use,    cannot be used with automatic systems.,    require knowledge of the computer design

Ans:A ,A


The hardware features of LISP machines generally include:
Options: large memory and a high-speed processor,    letter-quality printers and 8-inch disk drives,    a mouse and a specialized keyboard,    both (a) and (c)

Ans:D ,D


. You can open the Sort dialog box by choosing Sort from the ….. menu
Options: a. View b. Format c. Tools d. Data

Ans:– d,– d


A tool that can help designers understand the dependencies of database structures is a:
Options: dependency graph.,    data model.,    graphical display.,    None of the above is correct.

Ans:A ,A


A device mounted on a communication satellite which receives, amplifies and re-transmits signals from earth station is
Options: Track,    Transponder,    Transistor,    Terminal

Ans:B ,B


Considering all types of business, accounts receivable systems are not closely interrelated with the
Options: cost accounting system,    payroll system,    sales order system,    purchasing system

Ans:C ,C


The object-oriented development life cycle is which of the following?
Options: Analysis, design, and implementation steps in the given order and using multiple iterations.,    Analysis, design, and implementation steps in the given order and going through the steps no more than one time.,    Analysis, design, and implementation steps in any order and using multiple iterations.,    Analysis, design, and implementation steps in any order and going through the steps no more than one time.

Ans:A ,A


.   Which key on the keyboard can be used to view slide show
Options: a. F1 b. F2 c. F5 d. F10

Ans:6 – C ,6 – C


Which of the following cannot be checked in a switch-case statement?
Options: Character,    Integer,    Float,    enum

Ans:C ,C


You have been contracted to install a windows NT network in an office that is located in a strip mall. The office is located next to the power plant of the building, so a UPS (uninterruptible power supply) has already been installed. What type of cable should you use for the network cabling? Choose the best answer.
Options: TI,    UTP,    Fiber-optic,    PSTN

Ans:E ,E


. The option group ____ describes the contents of the entire option group.
Options: a. event b. frame c. label d. value

Ans:– c,– c


Right clicking something in Excel:
Options: a. Deletes the object b. Nothing the right mouse button is there for left handed people c. Opens a shortcut menu listing everything you can do to the object d. Selects the object

Ans:#8211; c,#8211; c


The transistorized computer circuits were introduced in the
Options: First generation,    Second generation,    Third generation,    Fourth generation

Ans:B ,B


What is the total resistance of a parallel circuit that contains two resistors having values of 220 ohm and 470 ohm?
Options: 220 ohm,    150 ohm,    445 ohm,    690 ohm

Ans:B ,B


. You can group noncontiguous worksheets with
Options: a. The group button on the standard toolbar b. The shift key and the mouse c. The ctrl key and mouse d. The alt+enter key

Ans:– c,– c


A hybrid computer uses a _____ to convert digital signals from a computer into analog signals.
Options: Modulator,    Demodulator,    Modem,    Decoder

Ans:C ,C


If your routing table has a static, a RIP, and an IGRP route to the same network, which route will be used to route packets by default?
Options: Any available route,    RIP route,    Static route,    IGRP route

Ans:C ,C


Which is true for the digital computer?
Options: It is less accurate than the analog computer,    It represents the decimal numbers through a string of binary digits,    It is used primarily in scientific applications,    Both (a) and (c)

Ans:B ,B


Which is considered a direct entry input device?
Options: Optical scanner,    Mouse,    Light pen,    Digitizer

Ans:E ,E


Which of the following protocols uses both TCP and UDP?
Options: FTP,    SMTP,    Telnet,    DNS

Ans:D ,D


In LISP, the function assigns . the value of a to b is
Options: (setq a b),    (setq b a ),    (b = a),    (set b = a)

Ans:B ,B


An application program interface (API) is which of the following?
Options: The same thing as ODBC.,    Middleware that does not provide access to a database.,    Middleware that provides access to a database.,    The same thing as JDBC.

Ans:C ,C


Subschema can be used to
Options: create very different, personalized views of the same data,    present information in different formats,    hide sensitive information by omitting fields from the sub¬schema's description,    All of the above

Ans:D ,D


The process of converting analog signals into digital signals so they can be processed by a receiving computer is referred to as:
Options: modulation,    demodulation,    synchronizing,    synchronizing

Ans:B ,B


. Which of the following components has a property sheet that includes settings for the frame and the option group?
Options: a. Option group label b. Option group frame c. Option button d. Option button labels

Ans:– b,– b


What is the uses of subnetting?
Options: It divides one large network into several smaller ones B. It divides network into network classes C. It speeds up the speed of network D. None of above

Ans:– A ,


The complexity of Binary search algorithm is
Options: a. O(n) b. O(log ) c. O(n2) d. O(n log n)  

Ans:b,b

www.000webhost.com