Laser Jet printer speeds are measured in pages per minute (ppm) what do we use to measure dot-matrix printers?


Options: lines per inch,    lines per sheet,    characters per inch,    characters per second

Ans:D ,D


Description: Section 2

Asked in: KCC-2018   |   JOA 556-2018  |  HRTC JTO-2017

Hits Today: 5304 | Level: Moderate


******************************************************

Want to see where do you stand among other aspirants in "Computer" category?

Click Here to take quick 10 mins MCQ test to find out.




Got some suggestion about this question or to make this site better? Please leave your comments below.




More Computer Hardware Related questions:


The space factor when determining the efficiency of algorithm is measured by
Options: a. Counting the maximum memory needed by the algorithm b. Counting the minimum memory needed by the algorithm c. Counting the average memory needed by the algorithm d. Counting the maximum disk space needed by the algorithm  

Ans:a,a


The designer of a form includes
Options: filed designators,    prompts,    data,    both (a) and (b)

Ans:D ,D


Conversion of hexadecimal number 1D7F16 to a decimal number is
Options: 755110,    877110,    555710,    778110

Ans:A ,A


“Ctrl + Right Arrow” is used to
Options: a. Moves the cursor one word right b. Moves the cursor end of the line c. Moves the cursor end of the document d. Moves the cursor one Paragraph down

Ans:–  A,–  A


Which of the following is a data communication link that connects more than two stations, nodes etc
Options: Multipoint connection,    Multipoint line,    Multiple chain,    Multilinked

Ans:B ,B


Programming languages currently available for robots:
Options: may be point-to-point languages,    require training,    may allow primitive motion,    All of the above

Ans:D ,D


A path linking 2 hardware or telecommunication units down which data and control signals can be transmitted is
Options: Modulation,    Demodulation,    Channel,    Signalling

Ans:C ,C


Which is valid statement
Options: A. 1 KB = 1024 Bytes B. 1 MB = 1024 Bytes C. 1 KB = 1000 Bytes D. 1 MB = 1000 Bytes

Ans:A,


If no multivalued attributes exist in a relation, then the relation is in what normal form?
Options: First normal form,    Second normal form,    Third normal form,    Fourth normal form

Ans:A ,A


. What is the purpose of indexing?
Options: a. To reduce table size b. To speedup data search c. both A and B d. none of the above

Ans:– b,– b


A basic S-R flip-flop can be constructed by cross-coupling which basic logic gates?
Options: AND or OR gates,    XOR or XNOR gates,    NOR or NAND gates,    AND or NOR gates

Ans:C ,C


Which programming language is based on Algol 60.
Options: PILOT,    SNOBOL,    ADA,    SIMULA

Ans:D,(Danswer


. Ctrl + R
Options: Re-Open the last closed document B. Re-Print the last printed page C. Re-Apply the last paragraph formatting D. Right align the selected Paragraph

Ans:– D ,


Conversion of an octal number 208 to its binary number is
Options: 100002,    101112,    101102,    111102

Ans:A ,A


Which of the following method can insert a new slide in current presentation?
Options: a. Right click on the Slide panel and choose New Slide b. From Insert menu choose New Slide c. Click on New Slide button on toolbar d. All of above

Ans: – D , – D


When did arch rivals IBM and Apple Computers Inc. decide to join hands?
Options: 1978,    1984,    1990,    1991

Ans:D ,D


Which of the following is a correct order of precedence in formula calculation?
Options: a. Multiplication and division exponentiation positive and negative values b. Multiplication and division, positive and negative values addition and subtraction c. Addition and subtraction positive and negative values exponentiation d. All of above

Ans:D,All of above


Which would you choose to create a bar diagram?
Options: Edit, Chart B. Insert, Chart C. Tools, Chart D. Format, Chart

Ans:– B ,


. Which of the following is drop down list?
Options: a. List b. Combo box c. Text area d. None

Ans: b, b


A database management system based on the concept of ownership is
Options: Network topology,    Network layer,    Network database system,    Network license system

Ans:C ,C


.   What is the term used to described the separation of a clip art object into different parts so that it becomes a PowerPoint object?
Options: a. Embedding b. Regrouping c. Ungrouping d. Grouping

Ans:7 – C ,7 – C


What do you need to check serial and parallel port?
Options: Port adapter,    Logic probe,    Loopback plug,    All of the above

Ans:C ,C


Who founded the Linux Kernel?
Options: Bill Gates,    Ben Thomas,    Richard Stallman,    Linus Torvalds

Ans:D ,D


The advantage(s) of incorporating the macro processor into pass 1 is(are):
Options: many functions do not have to be implemented twice.,    Functions are combined and it is not necessary to create intermediate files as output from the macros processor and input to the assembler.,    more flexibility is available to the programmer in that he may use all the features of the assembler in conjunction with macros.,    all of the above

Ans:D ,D


What is the impedance of a circuit composed of a 100 ohm resistor connected in parallel with a capacitor that has a reactance of 100 ohm?
Options: 60 Ohm,    99.3 Ohm,    250 Ohm,    70.7Ohm

Ans:D ,D


CD-ROM is a
Options: A) Semiconductor memory B) Memory register C) Magnetic memory D) None of above

Ans:-D,-D


The chmod ugo+rw note command can be represented in octal notation as
Options: chmod 555 note,    chmod 666 note,    chmod 444 note,    chmod 333 note

Ans:B ,B


Which of the following usually receives formal education on their role in the MIS
Options: government,    stockholders,    both (a) and (b),    neither (a) nor (b)

Ans:D ,D


A set of flip flops integrated together is called ____
Options: Counter B. Adder C. Register D. None of the above

Ans:– C ,


Which of the following is used to check for errors in RAM chips?
Options: ROM chip,    Microprocessor chip,    Parity chip,    EPROM chip

Ans:C ,C


Which peripheral port provides the FASTEST throughput to laser printers?
Options: RS-232,    SCSI,    Parallel,    Serial

Ans:C ,C


________ is a simple object model that is easier to understand and use than OLE DB, and is frequently used for database applications.
Options: ASP,    XML,    ODBC,    ADO

Ans:D ,D


Which of the following will happen when data is entered into a memory location?
Options: It will add to the content of the location,    It will change the address of the memory location,    It will erase the previous content,    It will not be fruitful if thjere is already some data at that location

Ans:C ,C


If you want to group the records in the abc database, you could use the Jobcode as the _____.
Options: Delete,    Update,    Sort Key,    Index

Ans:C ,C


. What are the different views to display a table
Options: a. Datasheet view b. Design view c. Pivote table & pivot chart view d. All of above

Ans:6 – d ,6 – d


How do you wrap the text in a cell?
Options: Format, cells, font B. Format, cells, protection C. format, cells, number D. Format, cells, alignment

Ans:– D ,


. To return the remainder after a number is divided by a divisor in EXCEL we use the function?
Options: a. ROUND ( ) b. FACT ( ) c. MOD ( ) d. DIV ( )

Ans:– c,– c


Which of the following can be Software?
Options: Routers B. Firewalls C. Gateway D. Modems

Ans:– B ,


The executive vice-president usually has responsibility for the
Options: physical system of the firm,    conceptual information system of the firm,    vice-president of finance,    All of the above

Ans:A ,A


. Following is not a database model
Options: a. Network database model b. Relational database model c. Object oriented database model d. None

Ans:4 – d ,4 – d


Which symbol is used to separate more than one command in the same command line?
Options: $,    #,    :,    ;

Ans:D ,D


The ALU of a computer responds to the commands coming from
Options: primary memory,    control section,    external memory,    cache memory

Ans:B ,B


The first items defined for a new system are its :
Options: inputs,    outputs,    storage,    processing

Ans:B ,B


In SQL, which command is used to add new rows to a table?
Options: ALTER TABLE,    ADD ROW,    INSERT,    APPEND

Ans:C ,C


. .... is the layer of a computer system between the hardware and the user program
Options: a. Operating environment b. Operating system c. System environment d. None of these

Ans: b, b


Which of the following applies to Internal DOS commands?
Options: Internal commands can be run whenever the DOS prompt is displayed,    Internal commands are reserved for DOS-level programming,    Internal commands can only be executed from a batch file,    Internal commands are stored on disk separately from COMMAND.COM

Ans:A ,A


. Which statement is valid about interpreter?
Options: A) It translates one instruction at a time B) Object code is saved for future use C) Repeated interpretation is not necessary D) All of above

Ans:A,A


Which command is used to list all the files with extension .lst?
Options: ls -l *.lst,    ls lst*,    ls *.*,    ls *[lst]

Ans:A ,A


Which command is used with vi editor to move the cursor to the left?
Options: i,    j,    k,    h

Ans:D ,D


Claude Shannon described the operation of electronic switching circuits with a system of mathematical logic called:
Options: LISP,    XLISP,    Boolean algebra,    neural networking

Ans:C ,C

www.000webhost.com