The data appearing first in the left portion of punched card is


Options: descriptive data,    coded data,    quantitative data,    All of the above

Ans:B,B


Description:

Asked in: KCC-2018   |   JOA 556-2018  |  HRTC JTO-2017

Hits Today: 8147 | Level: Moderate




Got some suggestion about this question or to make this site better? Please leave your comments below.


Want to see where do you stand among other aspirants in "Computer" Category?

Click Here to take quick 5 mins MCQ test to find out.

More Computer Fundamental Related questions:


Unit testing is
Options: running the system with line data by the actual user,    making sure that the new programs do in fact process certain transactions according to Specifications,    is checking the logic of one or more programs in the candidate system,    testing changes made in an existing or a new program

Ans:D ,D


. What is a light pen?

Options: A) Mechanical Input device B) Optical input device C) Electronic input device D) Optical output device

Ans:B,B


Which standard govern parallel communications?
Options: RS232,    RS-232a,    CAT 5,    IEEE 1284

Ans:D ,D


Which column contains all details of the permissions of a file when you issue the ls -l command?
Options: second,    fourth,    third,    first

Ans:D ,D


. Which command be used to clear the screen and display the operating system prompt on the first line of the display?
Options: a. Cd b. Md c. Rename d . cls

Ans:Correct Answer: d ,Correct Answer: d


Corporate modeling software can be used for
Options: cash planning,    operational budgeting,    capital budgeting,    All of the above

Ans:D ,D


The active cell:
Options: is defined by a bold border around the cell. B. Receives the data the user enters. C. It is the formula bar. D. Only A and B.

Ans:– D ,


. Ctrl + Q
Options: Paragraph formatting (Line Space and Paragraph Space) B. Close Word Application without saving Document C. Print Whole Document without confirmation D. Does nothing

Ans:– A ,


. Which of the following will happen when data is entered into a memory location?
Options: A) It will add to the content of the location B) It will change the address of the memory location C) It will erase the previous content D) It will not be fruitful if there is already some data at the location

Ans:C,C


While working with MS-DOS, which command is used to sort the file in ascending order?
Options: SORT filename,    SORT < filename,    SORT > filename,    SORT | filename

Ans:B ,B


What is the typical range of Ephemeral ports?
Options: 1 to 80 B. 1 to 1024 C. 80 to 8080 D. 1024 to 65535

Ans: D ,D. 1024 to 65535


. If you want all of the white cats grouped together in the database, you need to sort by ________.
Options: a. Color, then Gender b. Pet Type, then Color c. Pet Type, then Gender d. Color, then Pet Name

Ans:– b,– b


The merging of a free electron and a hole is called
Options: Covalent bonding,    Lifetime,    Recombination,    Thermal energy

Ans:C ,C


Punched-card equipment was first introduced in Britain in 1904 by a small company. What was the name of that company?
Options: The Tabulator Ltd.,    Tabulator Machine Company,    International Business Machines (IBM),    Accounting & Tabulating Corpn. of Great Britain

Ans:A ,A


Which is true regarding EIGRP successor routes? A successor route is used by EIGRP to forward traffic to a destination. Successor routes are saved in the topology table to be used if the primary route fails. Successor routes are flagged as "active" in the routing table. A successor route may be backed up by a feasible successor route. Successor routes are stored in the neighbor table following the discovery process.
Options: 1 and 3,    2 and 3,    1 and 4,    3, 4 and 5

Ans:C ,C


Bit map terminal
Options: support displays containing multiple windows,    requires considerable amount of video RAM,    requires tremendous amount of copying and hence low performance,    All of the above

Ans:D ,D


. What are the three options available in Insert >> Picture menu?
Options: a.  Clipart, Pictures, Shapes b.  Clipart, From File, Shapes c.  Clipart, From Files, AutoShapes d.  Clipart, Pictures, AutoShapes

Ans:7 – C ,7 – C


. You can select My Computer icon and press Alt + Enter to
Options: a. Delete it from desktop permanently b. Open it in Explorer mode c. Open System Properties dialog box d. Pin it on Start menu

Ans:3 – c ,3 – c


How would you round off a value from 1.66 to 2.0?
Options: ceil(1.66),    floor(1.66),    roundup(1.66),    roundto(1.66)

Ans:A ,A


. Background color or effects applied on a document is not visible in
Options: a. Web layout view b. Print Layout view c. Reading View d. Print Preview

Ans:– D,– D


Which command will clear all the translations active on your router?
Options: show ip nat translations,    show ip nat statistics,    debug ip nat,    clear ip nat translations *

Ans:D ,D


10. What is the maximum font size you can apply for any character
Options: a. 163 b. 1638 c. 16038 d. None of above

Ans:– B ,– B


With respect to personnel matters in the United States, OSHA stands for
Options: Overseas Housing Authority,    Occupational Safety and Health Act,    Office Standard Help Agreement,    Office Staff Help Administration

Ans:B ,B


Which of the following are true regarding OSPF areas? You must have separate loopback interfaces configured in each area. The numbers you can assign an area go up to 65,535. The backbone area is also called area 0. If your design is hierarchical, then you don't need multiple areas. All areas must connect to area 0.
Options: 1 only,    1 and 2 only,    3 and 4 only,    3, 4 and 5

Ans:D ,D


Which key do you press to force a page break?
Options: CTRL+ALT B. CTRL+ break C. CTRL+ Enter D. none of the above

Ans:– C ,


Normalization ________ data duplication.
Options: eliminates,    reduces,    increases,    maximizes

Ans:A ,A


Which command is used to change directory to the name beginning with a 'p'?
Options: cd p,    cd p?,    cd p*,    cd [p]

Ans:C ,C


A base register table
Options: is a term that refers to the control programs of an operating system,    is used to remember which of the general-purpose registers are currently available as base registers, and what base addresses they contain,    allows multiple programs to reside in separate areas of core at the same time,    allows the programmer to write base registers and displacements explicitly in the source program

Ans:B ,B


What will be the output of the program? #include<stdio.h> int main() { float a=0.7; if(a < 0.7) printf("C\n"); else printf("C++\n"); return 0; }
Options: C,    C++,    Compiler error,    Non of above

Ans:A ,A


What will you do to treat the constant 3.14 as a float?
Options: use float(3.14f),    use 3.14f,    use f(3.14),    use (f)(3.14)

Ans:B ,B


. If you want to keep track of different editions of a document which features will you use?
Options: a. Editions b. Versions c. Track Change d. All of above

Ans: – B , – B


What is the language used by most of the DBMSs for helping their users to access data?
Options: High level language,    Query language,    SQL,    4GL

Ans:B ,B


Location transparency allows for which of the following?
Options: Users to treat the data as if it is at one location,    Programmers to treat the data as if it is at one location,    Managers to treat the data as if it is at one location,    All of the above.

Ans:D ,D


When both inputs of a J-K flip-flop cycle, the output will:
Options: be invalid,    not change,    change,    toggle

Ans:B ,B


Ctrl + T
Options: a. Hanging Indent b. Left Indent c. Open Tabs Dialog box d. Terminate all opened Dialog box

Ans:–  A,–  A


In one-to-many relationship the table in ‘one’ side is called _______ and on ‘many’ side is called _______
Options: a. Child , Parent b. Parent , Child c. Brother , Sister d. Father , Son

Ans:dash; b,dash; b


The data-base environment has all of the following components except:
Options: users,    separate files,    data base,    data-base administrator

Ans:B ,B


Which of the following is the allocation method of a disk space?
Options: Contiguous allocation B. Linked allocation C. Indexed allocation D. All of the Above

Ans:– D ,


When applying a square waveform to a capacitor, the circuit tends to:
Options: peak the voltage and round off the current waveforms,    peak the current and round off the voltage waveforms,    round off both the voltage and current waveforms,    peak both the voltage and current waveforms

Ans:B ,B


The value of each bead in heaven is
Options: A) 1 B) 3 C) 5 D) 7

Ans:-C,-C


While working with MS-DOS, which command is used to restore only those files modified since the last backup, from the drive A to the currently logged drive or directory?
Options: RESTORE A: *.*/S,    RESTORE A: *.*/M,    RESTORE A: *.*/N,    RESTORE A: *.*/L

Ans:B ,B


What will be the output if you format the cell containing 5436.8 as ‘#,##0.00′?
Options: a. 5430 b. 5436.8 c. 5436.80 d. 6.8

Ans:B,– b


Which of the following statements correct about the below program? #include<stdio.h> int main() { struct emp { char name[25]; int age; float sal; }; struct emp e[2]; int i=0; for(i=0; i<2; i++) scanf("%s %d %f", e[i].name, &e[i].age, &e[i].sal); for(i=0; i<2; i++) scanf("%s %d %f", e[i].name, e[i].age, e[i].sal); return 0; }
Options: Error: scanf() function cannot be used for structures elements.,    The code runs successfully.,    Error: Floating point formats not linked Abnormal program termination.,    Error: structure variable must be initialized.

Ans:C ,C


. Scandisk
Options: a. Checks the disk b. Give information about disk c. Run from DOS mode d. All of the above

Ans:9 – d ,9 – d


. “Ctrl + Delete” is used to
Options: Delete the word just after the cursor B. Delete the word just before the cursor         C. Delete the single letter just after the cursor D. Delete the single letter just before the cursor

Ans:– A ,


. Your German supplier still invoices for parts in Deutsche marks. How can you have Excel convert those sums to Euros?
Options: a. On the Insert menu, click Symbol and from the currency symbols subset, select the Euro sign. b. On the tools menu, click Add-Ins, and select the Euro Currency Tools check box c. Apply a selected background color d. All of above

Ans:– b,– b


As a general rule.
Options: MIS performance criteria determine management information needs, and these needs determine the objectives of the firm.,    the firm's objective determine management information needs, and these needs determine MIS performance criteria,    management information needs determine MIS performance criteria, and these criteria determine the firm's objectives,    the firm's objectives determine MIS performance criteria, and these criteria determine manage¬ment information needs.

Ans:B ,B


. FORTRAN is a programming language. What does FORTRAN stand for?
Options: A) File Translation B) Format Translation C) Formula Translation D) Floppy Translation

Ans:C,C


Data collection terminals are used to report the activity of
Options: material flow,    machine use,    manpower use,    All of the above

Ans:D ,D


. Which is the highest form?
Options: A) Data B) Information C) Knowledge D) All of above

Ans:C,C

www.000webhost.com