Using the illustration from the previous question, what would be the IP address of S0 if you were using the first subnet? The network ID is 192.168.10.0/28 and you need to use the last available IP address in the range. Again, the zero subnet should not be considered valid for this question.
In Word, the default alignment for paragraphs is _____.
Options: a. left-aligned, or flush margins at the left edge and uneven edges at the right edge
b. centered, or equidistant from both the left edge and the right edge
c. right-aligned, or flush margins at the right edge and uneven edges at the left edge
d. justified, or flush margins at both the left and right edges
Which of the following will happen when data is entered into a memory location?
Options: It will add to the content of the location, It will change the address of the memory location, It will erase the previous content, It will not be fruitful if thjere is already some data at that location
Options: Return an entire collection of elements including duplicates., Return a collection of elements without duplicates., Return a specific subset of elements using a given criteria., All of the above.
Options: have both their operands in the main store., which perform an operation on a register operand and an operand which is located in the main store, generally leaving the result in the register, expect in the case of store operation when it is also written into the specified storage location., which perform indicated operations on two fast registers of the machine and have the result in one of the registers, all of the above
Options: is a hardware memory device which denotes the location of the current instruction being executed., is a group of electrical circuits (hardware), that performs the intent of instructions fetched from memory., contains the address of the memory location that is to be read from or stored into., contains a copy of the designated memory location specified by the MAR after a "read" or the new contents of the memory prior to a "write".
You have just installed a new internal PCI modem on you desktop. It will not dial out. what is the problem?
Options: The port speed is set too high, the modem has not been set up in control panel properties, the phone line is plugged into the line-in port on the modem card, the phone line out of the wall is plugged into the phone port on the modem card
Options: a background in systems theory and organization behavior, familiarity with the makeup and inner workings of major application areas such as financial accounting, personnel administration, marketing and sales, operations management, model building, and production control., competence in system tools and methodologies and a practical knowledge of one or more programming and data base languages., All of the above