Which of the following registers is loaded with the contents of the memory location pointed by the PC?

Options: Memory Address Register,    Memory Data Register,    Instruction Register,    Program Counter



Asked in: KCC-2018   |   JOA 556-2018  |  HRTC JTO-2017

Hits Today: 12092 | Level: Moderate


Want to see where do you stand among other aspirants in "Computer" category?

Click Here to take quick 10 mins MCQ test to find out.

Got some suggestion about this question or to make this site better? Please leave your comments below.

More Computer Fundamental Related questions:

Which number system is usually followed in a typical 32-bit computer?
Options:  2 B.  10      C.  16 D.  32

Ans:– A ,

How many bits are there in the Ethernet address?
Options: 64 bits B. 48 bits C. 32 bits D. 16 bits

Ans:– B ,

Silicon atoms combine into an orderly pattern called a
Options: Crystal,    Covalent bond,    Semiconductor,    Valence orbit

Ans:A ,A

Which of the following creates a drop down list of values to choose from a list?
Options: a. OLE Object b. Hyperlink c. Memo d. Lookup Wizard

Ans:ndash; d,ndash; d

What is the general name of the device which produces hardcopy graphics?
Options: COM,    Plotter,    Printer,    Microfilm


In SQL, the _____ command is used to recompile a view

Ans:D ,D

Which of the following is true regarding access lists applied to an interface?
Options: You can place as many access lists as you want on any interface until you run out of memory.,    You can apply only one access list on any interface.,    One access list may be configured, per direction, for each layer 3 protocol configured on an interface.,    You can apply two access lists to any interface.

Ans:C ,C

. High level language is also called
Options: A) Problem oriented language B) Business oriented language C) Mathematically oriented language D) All of the above


. Which function is used to calculate depreciation, rates of return, future values and loan payment amounts?
Options: a. Logical b. Math & Trigonometry c. Statistical d. Financial

Ans:– d,– d

The most common addressing techiniques employed by a CPU is
Options: a . immediate b . direct c . indirect e . all of the above


61. In Word you can force a page break
Options: a. By positioning your cursor at the appropriate place and pressing the F1 key b. By using the Insert/Section break on the Insert tab c. By positioning your cursor at the appropriate place and pressing Ctrl+Enter d. By changing the font size of your document

Ans:– C ,– C

Which of the following commands is used to get directory one level up?
Options: cd,    cd ..,    cd/,    chdir

Ans:B ,B

Which of the following is considered to be the destination host after translation?
Options: Inside local,    Outside local,    Inside global,    Outside global

Ans:D ,D

. Word has Web authoring tools allow you to incorporate _____ on Web pages.
Options: a. bullets b. hyperlinks c. sounds d. all of the above

Ans:– D,– D

ODL supports which of the following types of association relationships?
Options: Unary,    Unary and Binary,    Unary and Binary and Ternary,    Unary and Binary and Ternary and higher

Ans:B ,B

. If you select Insert >> Picture >> From File
Options: a.  You can insert pictures and clipArts b.  You can insert clipArts only c.  You can insert pictures only d.  None of above

Ans:6 – C ,6 – C

The _____ command is used to allocates an extent for the table in SQL

Ans:A ,A

This data type allows alphanumeric characters and special symbols.
Options: a. text b. memo c. auto number d. None of the above

Ans:dash; a,dash; a

Large computer system typically uses:
Options: Line printers,    Ink-jet printers,    Dot-matrix printers,    Daisy wheel printers


Which key deletes the character to the right of the cursor
Options: End B. Backspace C. Home D. Delete

Ans:– D ,

SQL can be used to:
Options: create database structures only.,    query database data only.,    modify database data only.,    All of the above can be done by SQL.

Ans:D ,D

Some of the columns of a relation are at different sites is which of the following?
Options: Data Replication,    Horizontal Partitioning,    Vertical Partitioning,    Horizontal and Vertical Partitioning

Ans:C ,C

. When did IBM introduce the 20286 based PC/AT?
Options: A) 1982 B) 1984 C) 1985 D) 1989


.  By default, what is the name of a new module in the Modules folder of the Project pane called?
Options: a.            Bas1 b.           Module c.           New Module d.            Module1

Ans:– d,– d

You need to find the broadcast address used on a LAN on your router. What command will you type into the router from user mode to find the broadcast address?
Options: show running-config,    show startup-config,    show interfaces,    show protocols

Ans:C ,C

An AI system developed by Daniel Bobrow to read and solve algebra word problems
Options: SHRDLU,    SIMD,    BACON,    STUDENT

Ans:D ,D

Cascade delete option
Options: a. is used to delete all the records of all tables in a database b. will repeat the recent delete operation to all the records of current table c. is available in Edit relationship dialog box which makes sure that all the related records will be deleted automatically when the record from parent table is deleted d. None of above

Ans:dash; c,dash; c

Environmental information is especially important to
Options: top-level managers,    middle-level managers,    low-level managers,    All of the above

Ans:A ,A

Which device is required for the Internet connection?
Options: Joystick B. Modem C. CD Drive D. NIC Card

Ans:– B ,

Which disk interface standard includes support for up to eight peripheral devices?
Options: ST50G/412,    IDE,    SCSI,    ESDI

Ans:C ,C

A certain power transformer has a turns ratio of 5. What voltage can you expect at the secondary winding when you apply 120 V to the primary winding?
Options: 4.73,    0.4 V,    24 V,    600 V

Ans:C ,C

. Hard disk is coated in both side with
Options: A) Magnetic metallic oxide B) Optical metallic oxide C) Carbon layer D) All of the above


47. If you want to convert a symbol or several lines of text into an AutoCorrect entry, you should:
Options: a. Insert the symbol or type the text in a Word document first. Then, select the text or symbol and go to the AutoCorrect dialog box. b. Click the Tools menu and choose AutoCorrect Options. Then, click the Insert menu and choose Symbol (or click the Format menu and choose Paragraph) to add the symbol or paragraph to AutoCorrect. c. AutoCorrect can only accommodate one line of text. It is not possible to convert a symbol or multiple lines of text into an AutoCorrect entry. d. Insert the symbol or type the text in a Word document first. Then, select the text or symbol and click the Edit menu followed by Paste Special. Select New AutoCorrect Entry and then click OK.

Ans:– A ,– A

What frequency range is used for microwave communications, satellite and radar?
Options: Low Frequency : 30 kHz to 300 kHz,    Medium Frequency : 300 kHz to 3 MHz,    Super High Frequency : 3000 MHz to 30000 MHz,    Extremely High Frequency :30,000 MHz

Ans:D ,D

A binary relationship cannot be which of the following?
Options: One-to-One,    One-to-Many,    Many-to-Many,    Zero-to-Zero

Ans:D ,D

To instruct Word to stop bulleting paragraphs, do any of the following except _____.
Options: a. press the enter key twice b. click the Undo button on the Standard toolbar c. press the backspace key to remove the bullet d. click the Bullets button on the Formatting toolbar

Ans:– B,– B

Bandlimited signal is
Options: transmission of signals without modulation,    a signal all of whose energy is contained within a finite frequency range,    simultaneous transmission of data to a number of stations,    All of the above

Ans:B ,B

The computer code for the interchange of information between terminals is
Options: ASCII,    BCD,    EBCDIC,    All of the above

Ans:A ,A

The hardware features of LISP machines generally include:
Options: large memory and a high-speed processor,    letter-quality printers and 8-inch disk drives,    a mouse and a specialized keyboard,    both (a) and (c)

Ans:D ,D

. How should you print a selected area of a worksheet, if you’ll want to print a different area next time?
Options: a. On the file menu, point to print area, and then click set print area. b. On the file menu, click print, and then click selection under print what c. On the view menu, click custom views, then click add d. All of above

Ans:– b,– b

Which of the following is not a basic configuration used in a data communication network?
Options: computer/peripheral-device configuration,    computer-to-computer commu¬nication,    computer to front-end processor communication,    communication through a data switch

Ans:C ,C

Structured design methodology is an approach to design that adheres to rales based on principles such as
Options: top-down refinement,    bottom-up design,    data flow analysis,    All of the above

Ans:C ,C

One approach to standardization storing of data?
Options: a. MIS b. structured programming c. CODASYL specification d. none of the above


. Which is the type of memory for information that does not change on your computer?

Options: A) RAM B) ROM C) ERAM D) RW / RAM


The microelectronics is the technology of
Options: microwaves,    microcomputers,    chips,    automatic processing

Ans:C ,C

86. A letterhead should contain all of the following EXCEPT ____.
Options: a. full street address b. logo c. complete legal name of the company, group, or individual d. None of the above

Ans:– D ,– D

Which one of the following statements applies to common auto batteries?
Options: Auto batteries are primary wet-cell batteries,    Auto batteries are secondary wet-cell batteries,    Auto batteries are secondary dry-cell batteries,    Auto batteries are primary dry-cell batteries

Ans:B ,B

As the temperature increases, the current gain
Options: increases,    decreases,    contant,    can be any of the above

Ans:A ,A

The coordinating procedure set in an order processing system is
Options: custom production planning,    warehouse,    product allocation,    All of the above

Ans:E ,E

A primary key should be defined as:
Options: NULL.,    NOT NULL.,    Either of the above can be used.,    None of the above are correct.

Ans:B ,B